Quenching & Tempering Open Die 1.4903 Stainless Steel Forging
Quenching & Tempering Open Die 1.4903 Stainless Steel Forging Premium open-die forged components in 1.4903 (X12CrMoWVNbN10-1-1) martensitic stainless steel, quenched and tempered for steam turbine guide rings and high-temperature power generation applications. Product Summary The Quenching & ...
1.4903 Stainless Steel Forging
,Tempering Open Die Stainless Steel Forging
,Quenching Open Die SS Forging
Product Summary
The Quenching & Tempering Open Die 1.4903 Stainless Steel Forging is manufactured by Jiangyin Fangyuan Ringlike Forging Flange Co., Ltd. (Brand: FY) using the open-die forging process. The product is forged from grade 1.4903 (DIN EN / ASTM equivalent) martensitic stainless steel, specifically engineered for steam turbine guide ring applications requiring high-temperature strength, creep resistance, and dimensional stability under thermal cycling conditions. The forging undergoes quenching and tempering heat treatment to achieve the required mechanical properties per ASME / ASTM-2013 standards.
View Forging Process Video (YouTube)
Source: YouTube — "Carbon Stainless Steel Forging Heavy Duty Strong Rigity ASTM ASME." Accessed via youtube.com/watch?v=kXTzJ6fDbx8
Key Attributes
Chemical Composition (Weight %)
Note: The composition table above reflects the data published on the manufacturer's product specification. Grade 1.4903 per DIN EN 10216-2 / SEW 550 also specifies Mo (1.00-1.50), W (0.40-0.60), V (0.20-0.30), Nb (0.04-0.09), and N (0.040-0.090) as alloying elements contributing to creep strength and microstructural stability at elevated temperatures. Actual certified composition per Mill Test Certificate (MTC) should be verified for each heat lot.
Reference Mechanical Properties (Quenched & Tempered Condition)
Note: Reference values are based on typical properties for grade 1.4903 in quenched and tempered condition per applicable DIN EN / SEW standards. Actual tested values per Mill Test Certificate (MTC EN 10204 3.1) may vary based on section size, heat treatment parameters, and specific heat chemistry. The PED 3.1 certificate provided confirms compliance with Pressure Equipment Directive requirements.
The open-die forging production line at the manufacturer's facility produces the following forging product types in grade 1.4903 and other material grades:
Material Grades Available (Open-Die Forging Line)
Open-Die Forging Production Workflow
The open-die forging process for grade 1.4903 stainless steel follows a controlled multi-stage sequence from raw material verification through final inspection. Open-die forging is particularly suited for large-diameter and heavy-weight components such as steam turbine guide rings, where the material is progressively deformed between flat or shaped dies without full enclosure, allowing flexibility in forging geometry and grain flow optimization.
Open-Die Forging Production Facilities
Core Manufacturing Equipment (Full Facility)
Heat Treatment Parameters
Grade 1.4903 martensitic stainless steel requires precise heat treatment to achieve the required tempered martensite microstructure for high-temperature service. The following heat treatment capabilities are available:
Note: Heat treatment parameters are reference values based on applicable DIN EN / SEW 550 specifications for grade 1.4903. Actual parameters are determined per the manufacturer's qualified Heat Treatment Procedure Specification (HTPS) and customer requirements. The 5 dedicated heat-treatment furnaces on the open-die forging line ensure controlled thermal processing for each component.
In-House Testing & Inspection Laboratory
- Chemical Analysis — Spectrometer-based elemental composition verification per ASTM/EN standards
- Metallographic Examination — Microstructure analysis including grain size, phase verification, and inclusion rating
- Spectrometer Test — Quantitative chemical analysis for grade conformance confirmation
- Mechanical Property Testing — Tensile, yield, elongation, hardness (HBW), and Charpy impact testing
- Ultrasonic Testing (UT) — Non-destructive examination per ASTM E2375 / EN 10228-3 for internal soundness
Dimensional & Tolerance Reference
Primary Application: Steam Turbine Guide Ring
The 1.4903 grade open-die forging is specifically applied to steam turbine guide ring components in power generation plants. The guide ring serves as a critical stationary component in the turbine casing assembly, providing precise blade tip clearance control and thermal expansion accommodation under operating temperatures up to 620°C.
Other Application Sectors
Company Profile
Jiangyin Fangyuan Ringlike Forging Flange Co., Ltd. was established in 1993 and is a member of the Confederation of Chinese Metalforming Industry, the Chinese Wind Energy Association, and the China Petroleum & Petro-chemical Equipment Industry Association. The company specializes in manufacturing forged rings, forged discs, forged shafts, flanges, valve forgings, and pressure vessel forgings using open-die and ring-rolling processes.
With a total facility area of 100,000 m² (building area 70,000 m²) and 600 employees including 138 senior engineers and technicians, the company operates a vertically integrated production system covering open-die forging, ring rolling, heat treatment, machining, and in-house testing. The open-die forging line has an annual capacity of 30,000 tons with equipment including 8-ton, 6-ton, and 3-ton electro-hydraulic hammers, feeding machines up to 10-ton capacity, and 5 heat-treatment furnaces. The manufacturer supplies forged components to multinational industrial clients including GE, SKF, ABB.
Industry Association Memberships
- Confederation of Chinese Metalforming Industry (CCMI)
- Chinese Wind Energy Association (CWEA)
- China Petroleum & Petro-chemical Equipment Industry Association (CPEIA)
Quality Management System & Certifications
The following certifications have been obtained by the manufacturer. The PED 3.1 certificate specifically applies to pressure-bearing forged components including the 1.4903 grade steam turbine guide ring forgings.
Certification Scope Clarification
ISO 9001:2008 and ISO 14001:2004 certifications cover the manufacturer's overall quality and environmental management systems applicable to all forging product lines. The PED 3.1 Certificate specifically applies to pressure equipment forged components per Directive 2014/68/EU, with Material Certificates issued per EN 10204 Type 3.1 — directly applicable to the 1.4903 grade forging on this page when supplied for pressure equipment applications. Marine classification society certificates (ABS, BV, DNV, RINA, GL, LR, CCS, NK, KR) apply to forgings intended for marine and offshore applications. API-6A and API-17D certifications apply to forged components for wellhead and subsea equipment. CNAS accreditation applies to the in-house testing laboratory. Buyers should verify specific certificate applicability to their required product grade and application during procurement.