logo
Quality 650MPa Forged Steel Rings 240HB–320HB Hardness For Gearbox Rings factory
Quality 650MPa Forged Steel Rings 240HB–320HB Hardness For Gearbox Rings factory

650MPa Forged Steel Rings 240HB–320HB Hardness For Gearbox Rings

650MPa Forged Steel Rings 240HB–320HB Hardness For Gearbox Rings
Basic Properties
Country Of Origin
China
Brand Name
FY
PRODUCT MODEL
FY001
Trading Properties
Product Summary

650MPa Forged Steel Rings — 240HB–320HB Hardness for Gearbox Rings FY001 forged steel rings are engineered for gearbox-ring applications, supplied in quenched and tempered (Q+T) condition with a stated dimensional range of 1,000–7,800 mm. The ECER product listing identifies the material as 34CrNiMo6 ...

Product Details
Highlight:

650MPa forged steel rings

,

240HB–320HB hardness gearbox rings

,

forged steel gearbox rings

Size: 1000-7800mm
Elongation: N/A
Application: Gearbox Rings
Yield Strength: 650mpa
Heat Treatment: Q+T
Surface Treatment: N/A
Impact Strength: NA
Dimensional Accuracy: 1000-7800mm
Name: Forged Steel Rings
Product Description
650MPa Forged Steel Rings — 240HB–320HB Hardness for Gearbox Rings

FY001 forged steel rings are engineered for gearbox-ring applications, supplied in quenched and tempered (Q+T) condition with a stated dimensional range of 1,000–7,800 mm. The ECER product listing identifies the material as 34CrNiMo6 alloy steel.

Model: FY001  |  Material: 34CrNiMo6  |  Heat treatment: Q+T  |  Application: Gearbox rings

The values below are transcribed from the product listing and related manufacturer information. Final acceptance criteria should be agreed in the purchase specification and confirmed by the inspection and test documents for the supplied heat and finished ring.

FY001 34CrNiMo6 quenched and tempered forged steel ring for gearbox applications, shown in the ECER product listing
Product image displayed in the associated ECER listing; confirm the final configuration against the approved drawing.
Technical Specifications
Product Forged steel ring
Brand / model FY / FY001
Material 34CrNiMo6 alloy steel (as stated in the ECER product description)
Yield strength 650 MPa (listing-stated value)
Tensile strength 750–1,200 MPa (listing-stated range)
Hardness 240–320 (unit and test scale to be specified in the order documents)
Heat treatment Quenching and tempering (Q+T)
Size / dimensional range 1,000–7,800 mm (the listing uses this as the size and dimensional-accuracy range; it is not a stated tolerance band)
Thickness 250 mm (listing-stated parameter; confirm drawing reference and measurement location)
Surface roughness 3.2 (unit and measurement standard to be confirmed)
Shape / application Ring / gearbox rings
Impact strength / elongation Not numerically specified in the listing; define required values and test temperature in the purchase specification where applicable.
MOQ / price / delivery Negotiable, according to the ECER listing
Engineering interpretation: 1,000–7,800 mm is presented as a product size range, not as a machining tolerance. The listing does not define a tolerance class, hardness scale, impact-test temperature, or elongation acceptance value. These should be stated on the approved drawing and inspection plan rather than inferred.
Material and Manufacturing Route

34CrNiMo6 is identified by the ECER listing as the alloy grade for this FY001 ring series. The product record describes Q+T heat treatment. For procurement, the material designation, applicable material standard and edition, heat-treatment condition, and required mechanical-property location should be fixed in the order specification.

Typical Process Control Points
  1. Material verification: review the material certificate, heat number, grade designation, and chemical analysis against the purchase specification.
  2. Forging: establish the forging route and reduction requirements against the approved manufacturing procedure and ring dimensions.
  3. Quenching and tempering: record furnace cycle, load identification, temperature history, and heat-treatment batch traceability.
  4. Machining: machine to the approved drawing, with datum references, dimensional tolerances, and surface-finish requirements clearly defined.
  5. Final inspection: verify dimensions and specified mechanical and non-destructive tests before release.

These are procurement and process-control recommendations for a Q+T alloy-steel forging. They are not a claim that every listed inspection or process parameter is included as standard in every order.

Applications and Engineering Fit

The product listing names gearbox rings as the principal application. Ring forgings used in gearbox assemblies may serve as structural or machined gear-support components, depending on the equipment design. Suitability depends on the final geometry, loading, rotational speed, fatigue duty, mating components, heat-treatment condition, and machining allowance.

Information to Confirm Before Design Release
  • Approved drawing with OD, ID, height, section profile, datum scheme, and machining allowances.
  • Material standard and grade confirmation for 34CrNiMo6, including any customer-specific supplementary requirements.
  • Specified yield and tensile strength, hardness scale/range, impact properties, and test sampling locations.
  • Dimensional tolerances, concentricity/runout requirements, and surface roughness units and method.
  • Required NDT method, acceptance level, inspection coverage, and third-party witness points.
Inspection and Quality Control

The manufacturer's published quality-control page describes chemical analysis, magnetic-particle crack detection, ultrasonic testing, dynamic-fatigue testing, hardness testing, and proof/ultimate-strength testing. It also describes inspection at incoming-material, work-in-progress, finished-product, and warehouse stages.

Document / check Procurement review focus
Material Test Certificate Heat number, grade, chemical composition, heat-treatment condition, and reported mechanical properties.
Dimensional report Measured OD, ID, height, profile, runout/concentricity, and drawing revision.
Hardness report Test method, scale, locations, readings, and acceptance range.
UT / MT reports Applicable procedure, coverage, acceptance criteria, calibration, and traceability to the ring.
Third-party inspection Inspection agency, scope, hold/witness points, and signed release documentation if contractually required.

The manufacturer quality page describes available inspection capabilities. The inspection scope for a particular FY001 order should be confirmed in the contract and supported by order-specific reports.

Manufacturer Profile and Certifications

Jiangyin Fangyuan Ringlike Forging And Flange Co., Ltd. identifies itself as a manufacturer of ring forgings and other forged and machined metal components. Its published factory information describes three forging production lines, a 3,000 m² testing center, chemical-analysis and metallographic facilities, spectrometers, mechanical testing equipment, and ultrasonic testing equipment.

The factory page states a maximum ring diameter of 5,000 mm. The 7,800 mm size stated for this particular product listing is therefore retained as the product-page claim and should be confirmed directly against the current production route, drawing, and capacity confirmation before order placement.

Certification Records and Scope

The supplier profile and quality page display historical references to ABS, CCS, BV, DNV, GL, KR, LR, NK, RINA, API-6A, API-17D, ISO 9001:2008, ISO 14001:2004, and PED. The quality page shows expiry dates for the listed certificates between 2016 and 2020. These historical entries are not presented as evidence of current certification or as product-specific approvals for FY001. Buyers should request current certificates and verify their legal entity, validity period, standard, and scope.

Manufacturer Export Activity

Public NBD trade-profile data are indexed to the company name JIANGYIN FANGYUAN RINGLIKE FORGING & FLANGE CO., LTD. The profile reports 60 records and 9 buyers, with annual export-entry counts shown for selected years below.

Period Consolidated product categories / HS codes Target region Shipment profile
2025 Metal products and steel semi-finished / forged categories; profile lists HS codes including 72221900, 72283000, 72284000, 72286000, 73261900 and 73269090. Indonesia appears in the displayed recent records. 15 export entries in the annual summary. Recent sample records dated 20 Oct 2025 describe ASTM A182 F316/F316L round bars under HS 72221900.
2023 Company-linked export categories; the profile lists 1 category and 1 region in its annual summary. Not named in the annual summary. 12 export entries reported.
2022 Company-linked export categories; the profile lists 2 categories and 1 region in its annual summary. Not named in the annual summary. 15 export entries reported.
Product-level distinction: the visible 2025 Indonesia examples are round-bar shipments, not evidence of shipments of this specific 34CrNiMo6 FY001 forged ring. The trade profile supports company-level export activity only; it does not establish a delivery history for this exact product, material, dimension, or buyer application.
Buyer Due-Diligence Checklist
  • Match the supplier's legal name and address across the quotation, contract, invoice, certificate, and shipping documents.
  • Confirm that the quoted shipment is FY001 / 34CrNiMo6 and matches the approved drawing and material standard.
  • Request destination-specific shipping references for comparable heavy ring forgings, not only unrelated round-bar shipments.
  • Verify bills of lading, customs declarations, commercial invoices, and consignee details independently where appropriate.
Media and Cross References

The following third-party pages are provided as cross-reference materials associated with the product listing. They should be treated as supporting references, not substitutes for drawings, material certificates, inspection reports, or contract documents.

B2B Buyer FAQ
1. Is the minimum order quantity fixed?

The ECER listing marks MOQ as negotiable. Confirm the minimum order by ring dimensions, material grade, forging route, machining scope, and production schedule in the quotation.

2. How should dimensional accuracy be specified?

Provide a controlled drawing with OD, ID, height, profile, datums, tolerances, runout/concentricity, and machining allowances. The listed 1,000–7,800 mm is a size range, not a numerical tolerance.

3. How can the 650 MPa yield-strength value be verified?

Require an order-specific material test certificate linked to the heat number and ring identification. Agree the test standard, specimen orientation/location, sampling frequency, and acceptance criteria before production.

4. What inspection reports can be requested?

Depending on the contract, request material chemistry, tensile test, hardness, dimensional inspection, ultrasonic testing, magnetic-particle testing, and third-party inspection reports. Define the applicable procedures and acceptance levels in advance.

5. How should heavy rings be packed for sea transport?

Specify corrosion protection, dry wrapping or barrier materials, desiccants where appropriate, impact protection, lifting points, blocking and bracing, moisture protection, and seaworthy packing suitable for the ring mass and transport route. Approve the packing plan before dispatch.

6. What is the delivery lead time?

The product listing marks delivery time as negotiable. Obtain a written schedule covering raw-material procurement, forging, Q+T, machining, inspection, packing, and shipment readiness; include agreed milestones and change-control terms.

7. Can the ring be customized for a gearbox design?

The manufacturer describes OEM/ODM work to customer drawings or requirements. Submit the drawing, material specification, duty conditions, machining requirements, inspection plan, and target delivery schedule for a feasibility review.

8. What after-sales and technical support should be agreed?

Define the document package, nonconformance notification process, claim evidence requirements, response times, replacement or repair responsibilities, and technical interface for installation or machining questions in the purchase contract.

Related Products