Hardness 240–320 Forged Steel Rings With 650 MPa Yield Strength
Hardness 240–320 Forged Steel Rings with 650 MPa Yield Strength FY001 forged steel rings are engineered for demanding industrial and gearbox applications. The published product data identifies quenching and tempering (Q&T), a hardness range of 240–320, and a stated yield strength of 650 MPa. Ring ...
240–320 hardness forged steel rings
,650 MPa yield forged rings
,forged steel rings high hardness
FY001 forged steel rings are engineered for demanding industrial and gearbox applications. The published product data identifies quenching and tempering (Q&T), a hardness range of 240–320, and a stated yield strength of 650 MPa. Ring dimensions, steel grade, heat-treatment condition and inspection acceptance criteria should be fixed on the approved drawing and purchase specification.
- 240–320 HBPublished hardness range; confirm test method and acceptance basis.
- 650 MPaStated yield strength; verify by heat-specific test certificate.
- 1,000–7,800 mmPublished size range; confirm whether this refers to outside diameter.
The product information identifies model FY001 and forged steel as the material description. A related ECER product record for the same supplier and performance profile also references 250 mm thickness, tensile strength of 750–1,200 MPa and Q&T heat treatment. These figures are procurement reference values, not substitutes for the material grade, drawing and mill test certificate applicable to an individual order.
| Parameter | Published Value / Procurement Definition |
|---|---|
| Product | Forged steel ring |
| Brand / model | FY / FY001 |
| Material | Forged steel; exact grade to be stated on the approved order specification |
| Heat treatment | Q+T (quenching and tempering) |
| Hardness | 240–320; HB is specified in the associated detailed product record. Confirm the hardness scale and test locations for the ordered item. |
| Yield strength | 650 MPa, as stated in the product information |
| Tensile strength | 750–1,200 MPa, as stated in the associated product specification; confirm grade-specific limits and test basis |
| Size range | 1,000–7,800 mm; dimensional reference (OD/ID) to be defined by drawing |
| Thickness | 250 mm, listed in the associated detailed product information; confirm ring section dimensions |
| Surface roughness | 3.2, as listed; unit and measurement convention to be defined on drawing (typically Ra when specified) |
| Surface treatment | N/A / not specified |
| Shape | Ring |
| Elongation | Not stated as a numeric acceptance value; define by material standard and order specification |
| Impact strength | Not stated as a numeric acceptance value; define test temperature, specimen and minimum energy where required |
| Place of origin | China |
| Application stated | Gearbox rings and industrial machinery components |
The related product information contains both "seamless forged" and "closed-die forged" process descriptions. The exact route for a given ring must therefore be identified in the approved manufacturing route (forging method, ring rolling or die forging), rather than inferred from a generic product heading. Mechanical properties are dependent on steel grade, section size, heat-treatment practice and specimen location.
- 01Material identification — Confirm the steel grade, applicable material standard, heat number and incoming material traceability before production.
- 02Forging operation — Define the forging route, reduction ratio where applicable, deformation sequence, ring dimensions and machining allowance in the process plan.
- 03Quenching and tempering — Record furnace identification, charge arrangement, heating and holding parameters, quench medium and tempering cycle for the approved grade and section size.
- 04Mechanical testing — Verify tensile properties, yield strength, elongation, impact properties where specified, and hardness against the agreed standard and sampling plan.
- 05Nondestructive examination — Specify ultrasonic testing and, where relevant, magnetic-particle or liquid-penetrant examination, including acceptance level and inspection coverage.
- 06Dimensional and final inspection — Check OD, ID, height, wall thickness, flatness, runout, machining allowance and surface condition against the released drawing.
- EN 10204 Type 3.1 material inspection certificate or the certificate type stated in the contract.
- Heat-treatment chart and traceable heat-treatment record.
- Chemical composition and mechanical-property test reports.
- Hardness map or defined test-location report.
- Ultrasonic test report to the specified standard and acceptance level.
- Dimensional inspection report against the approved drawing revision.
- Third-party inspection release, where required by the purchaser or end-user.
No universal tolerance, impact value, fatigue life or service-life figure is assigned here. Such limits must be established from the selected steel grade, governing standard, ring geometry, operating load and customer drawing.
Forged rings can be used as gear blanks, support rings and structural elements in heavy-duty gearbox assemblies. Final suitability depends on tooth or interface geometry, load spectrum, material grade, heat treatment and machining quality.
Large-section forged rings are used in machinery where a continuous annular component is required. The ring drawing should define the fit surfaces, datum references, machining stock and dimensional inspection points.
Where rings are specified for rotating or high-load equipment, the engineering review should address stress concentration, fatigue loading, material cleanliness, heat-treatment uniformity and NDT requirements.
The following resources are supplied as product-related reference links. The YouTube item is presented as a text link only; no embedded video player is loaded in this description. The ECER product record provides a second product-information reference, while Pinterest is retained as a visual/social reference.
-
Product Video · YouTube
Open the supplied video reference
Video link supplied for cross-reference. Product claims in this description are based on the published product attributes and technical records, not on unverified video narration.
-
Related Product Record · ECER
View the supplied ECER product page
Cross-reference for the product title and stated hardness / yield-strength positioning.
-
Visual Reference · Pinterest
Open the supplied Pinterest pin
Social visual reference. It is not treated as a material certificate, inspection report or independent mechanical test record.
Cross-source corroboration is applied conservatively: product attributes are checked against the associated ECER product information and the manufacturer's published product catalogue. Social media links are source references only; they do not independently validate yield strength, hardness, steel grade or dimensional tolerances.
Jiangyin Fangyuan Ringlike Forging And Flange Co., Ltd. is identified on the metal-forgings.com company profile as a China-based manufacturer established in 1993. Its stated product range includes forged rings, gear rings, flanges, main shafts, valve forgings and pressure-vessel forgings.
The company profile reports a 100,000 m² site, a 70,000 m² building area, more than 506 employees, approximately 138 engineers and technical specialists, and an annual production capacity of 150,000 tonnes. It also describes an in-house testing center with chemical analysis, metallographic, spectrometric, mechanical-property and ultrasonic testing equipment.
These facility and capacity figures are manufacturer-published profile statements. For a specific order, the buyer should confirm the producing site, actual process route, available machine capacity and the inspection resources assigned to the contract.
- 1993Established
- ManufacturerBusiness type
- Jiangyin, Jiangsu, ChinaLocation
- 100,000 m²Reported site area
- 150,000 tonnesReported annual capacity
- 506+Reported workforce
- Chemical, metallographic, mechanical & ultrasonicTesting resources
The supplier profile on ECER displays 14 certificate entries, including references to ABS, CCS, BV, DNV, GL, KR, LR, NK, RINA, API 6A, API 17D, ISO 9001:2008 and ISO 14001:2004. These are certificate/profile references, not a blanket statement that every certificate is current or applies to this specific FY001 ring.
Certificate applicability must be checked by named legal entity, manufacturing site, product category, material grade, size/weight range, process and validity period. API monogram scope, classification-society approvals and management-system certificates are distinct forms of approval and should not be treated as interchangeable product certifications.
A separate ISO 9001:2015 certificate issued by LRQA to Metal Forgings Pvt. Ltd. in India is not attributed to Jiangyin Fangyuan and is intentionally excluded from this manufacturer's certification claims.
- 433Reported international shipment transactions in an ECER-normalized supplier trade profile
- 2021–2026Multi-year coverage shown in related ECER supplier trade summaries; latest cited records through September 2026
- 5 marketsIndia, Brazil, Vietnam, Ukraine and Colombia named in the normalized profile
ECER product pages associated with Jiangyin Fangyuan Ringlike Forging And Flange Co., Ltd. report a normalized supplier trade profile covering 433 international shipment transactions, with India as the principal destination concentration and additional named markets including Brazil, Vietnam, Ukraine and Colombia. Reported product categories include forged and carbon-steel components, gear blanks, perforated discs and rolling-mill parts.
| Timeframe / Period | Consolidated Product Categories & HS Codes | Target Region / Major Markets | Consolidated Volume / Shipment Profile |
|---|---|---|---|
| 2022 | Industrial steel products; public NBD supplier record includes HS 72221900 for stainless-steel round bar exports | Indonesia is visible in the cited 20 October 2025 record series; destination breakdown varies by entry | 15 export entries reported for 2022 in the NBD company summary |
| 2023 | Forged / steel industrial components; categories summarized by supplier-level trade record | One reported region in the NBD annual summary | 12 export entries reported for 2023 |
| 2025 | Stainless-steel round bars and other industrial steel products; HS 72221900 appears in the cited shipment examples | Indonesia appears in the cited shipment entries | 15 export entries reported for 2025; sample shipment lines dated 20 October 2025 |
| 2021–Sep 2026 | Forged and carbon-steel components, gear blanks, perforated discs and rolling-mill parts; representative ECER classifications include HS 84839000, 84559000, 7207191900 and 73269099 | India, Brazil, Vietnam, Ukraine and Colombia | 433 normalized international shipment transactions reported across the ECER supplier profile; this is a separate normalized dataset and is not added to NBD annual entry counts |
- 1. Can forged rings be manufactured to a custom drawing and order quantity? The product listing identifies a broad dimensional range. Custom geometry and order quantity should be assessed against the released drawing, steel grade, forging route, available billet size, tooling requirements and production schedule. The quotation should state the minimum order quantity for the selected specification.
- 2. How should hardness and strength requirements be controlled? Specify the hardness scale, range, test method, test locations and sampling frequency. The stated 240–320 hardness and 650 MPa yield strength should be verified against the selected steel grade, heat-treatment condition and heat-specific mechanical test certificate.
- 3. Which material and inspection documents should accompany the shipment? Define the required EN 10204 certificate type, chemical composition, tensile test, hardness report, heat-treatment record, ultrasonic test report and dimensional inspection report. Third-party inspection should be included where required by the purchaser or end-user.
- 4. Can ultrasonic testing and other NDT methods be specified? Yes, NDT requirements can be included in the technical agreement. Identify the applicable standard, acceptance class, coverage, scanning direction, reference blocks, reporting format and whether additional MT or PT is required.
- 5. How should machining tolerances and surface finish be agreed? Use a controlled drawing with explicit OD, ID, height, wall thickness, flatness, runout, datum references, machining allowance and surface roughness notation. A generic size range is not a dimensional tolerance.
- 6. What packaging is suitable for ocean freight? Specify rust-preventive coating or VCI protection as compatible with the material and downstream processing, sealed moisture barriers, desiccants where appropriate, robust timber cradles, anti-impact blocking, lifting points and clear center-of-gravity markings. Packaging should be designed around the ring mass and shipping route.
- 7. How should lead time and delivery commitments be controlled? The purchase contract should define the schedule from drawing approval and material procurement through forging, heat treatment, machining, inspection, FAT or third-party release, packing and dispatch. Include milestone dates and a process for approving schedule changes.
- 8. What after-sales and technical support should be agreed? Define the warranty period and start date, nonconformance response process, technical documentation, replacement-part responsibility, storage guidance, preservation requirements and support for installation or machining issues. These commitments should be stated in the order contract.